Describe The Process Of Latex Gloves

Apr. 03, 2019 | 17:30:54

Latex gloves latex gloves are a type of glove that differs from regular gloves in that they are manufactured from latex. Can be used as home, industry, medical, beauty and other professional applications, is the necessary hand protective equipment. Selection of natural latex, with other precision additives processing of latex gloves, products through Disposable Gloves Production Lines to special appearance processing, wear comfortable, in industrial and agricultural production, medical, daily life are widely used.

Process The Paper

The rubber is first sliced by the rubber refining machine and then sent to the sol cylinder to mix with the gasoline sol. After emulsifying and modulating, the sol is pumped to the tundish. The rubber solution dissolved in gasoline is fed from the top of the distillation column and heated by steam. The light component gasoline is heated into the gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler. Oil and water mixture to the oil and water separator, oil and water stratification. The upper gasoline is recovered, and the lower water is sent to the cooling tower by the water pump. Distillation tower kettle latex according to its own pressure to send latex mixing cylinder mixing, mixing to centrifuge separation of raw material latex gloves, and then through color mixing, filtration after waiting for use.

The glove model supplied by Disposable Gloves Production Lines Manufacturer,was cleaned with acid and alkali and water first. The cleaned model was immersed in hot water and heated before being soaked into the coagulant and soaked in glue. After the rubber, send to the oven to dry, add fiber inner sleeve, then send hot water to the oven vulcanization, drying molding. After demolding, the gloves are inflated for inspection, shaped at low temperature, dry at medium temperature, washed, dehydrated and dried before being packaged and sent to the product warehouse.

                                           Disposable Gloves Production Lines Manufacturer

Primary Pollutant

1) mold washing wastewater and gel containing wastewater occurred in the washing process of each production line; (2) a small amount of ammonia gas occurs in the production process; (3) dust generated in boring processes; (4) air pollutants such as SO2, NOx and particulate matter occurring during boiler operation; (5) air pollutants such as SO2, NOx and particulate matter occurred during the operation of the standby diesel generator set; (6) wastes in the production process; (7) sludge in sewage treatment station.

The Solution

The water treatment process includes physicochemical, biological touch oxidation and activated carbon adsorption. The process consists of mechanical grille, conditioning tank, air float tank, biological touch oxidation tank, sedimentation tank, sand filter and activated carbon filter, and wind machine room. Waste gas treatment process text qiu li ma stone dust collector, and then with alkali water reaction, desulfurization dust.

The Characteristics

Latex gloves are suitable for automobile and battery industries. Fiberglass profession, aircraft installation; Aerospace; Environmental cleaning and cleaning. Latex gloves have wear resistance and puncture resistance. Acid and alkali resistance, grease, fuel oil and various solvents; Has a wide range of anti - chemical function, anti - oil effect is good; Approved by FDA. Latex gloves feature common fingertip texture planning, greatly enhancing grip and effectively avoiding slipping; No palm pattern patent planning, uniform adhesive penetration, enhance the protection; Unique hand planning, cotton lining for improved comfort.

In the field of automotive supervision mechanism, the opinions pointed out that in China, where the market has great potential and the wear-resistant rubber universal wheel industry is strong, the establishment of automobile production plants and assembly plants, the establishment of local distribution network and maintenance center, drive the export resources and reserves of self-owned brands of automobiles and parts, and enhance the brand influence. We will encourage auto companies to set up auto technology and engineering research and development centers in developed countries such as Europe and the United States, and cooperate with foreign companies with strong technological strength to improve the research and development and manufacturing technology of their own brands.

Previous: None