Household glove equipment technology
Rubber is firstly sliced with rubber agitator and then sent into sol tank and gasoline to mix sol. The sol is then emulsified and adjusted to pump the latex tundish. The rubber solution dissolved in gasoline is fed from the top of the distillation tower and is heated and distilled by steam. Light gasoline is heated to the gas phase and the gas is mixed and cooled with cooling water in an oil cooler. The oily water mixture then enters the oily water separator, the oily water layer. The upper gasoline is recycled and the lower pump is sent to the cooling tower for cooling. After cooling, the gas in the distillation column is cooled; According to its own pressure, the latex of distillation column is sent to the latex mixing cylinder, stirring and adjusting to separate the latex material of gloves from the centrifuge.
And then the color after that, The glove model of the household glove equipment is first cleaned with acid and alkali, washed with water, and then the washed model is first immersed in hot water, heated to impregnate the coagulant and dried to immerse in the household glove machine. Dip into oven and send to oven for initial drying, fiber sheath, red hot water, and then to oven for curing and drying. After release, check the gloves for inflation, low temperature setting, medium temperature drying, washing, dehydration and drying before packing and delivery to the finished product warehouse.
