You can click the form on the right, submit your personal information, we will have a professional to contact you.
With the end of the new coronavirus epidemic, the inventory of nitrile latex PVC gloves left over during the epidemic has been cleaned up, so the price of nitrile latex gloves has returned to the normal market price, and the glove market has been purified. Actively insight into the glove market, and carefully make investment decisions.
Generally, it takes about 80-90 days from drawing design to installation and commissioning.
Fengwang technology workshop has a batch of automatic glove stripping machine inventory, now is to do wholesale discount, contact our professionals to get the latest offer.
Tianjin Port.
Hand mold bearings —- need frequent lubrication. If the bearing does not rotate normally or is stuck, the glove will have mold impact resulting in glove holes and thickness inequality.
We have a professional online service that is ready to answer your questions. As for the maintenance cost to the factory, we have a detailed introduction.Click the link  https://www.gloveequipment.com/after-sales-service/
Fengwang automatic glove stripping machine is now in stock, low-cost wholesale, feel free to contact us.
How the Automatic Glove Stripping Work?
Glove Stripping Machine Video
The driving sprocket of the synchronous force taking mechanism meshes with the main transmission chain of the glove former on the glove production line, and transmits the power to the guide rail control; The glove stripping mechanism corresponding to the glove former is installed on the guide rail control, which can carry out the cyclic action of longitudinal synchronous movement, transverse separation movement and mechanical claw tensioning relative to the hand mold, thus completing the full set of operation of glove stripping. The glove blowing edge and glove blowing off correspond to the position of the mechanical claw initially clamping the hand mold and the final pulling off the glove, and the glove can be blown on the mechanical claw or the glove can be blown off the mechanical claw, so as to realize the full automation of glove stripping.
What are the Features of the Glove Stripper
Glove stripper and the entire production line run at the same speed, without the need for a motor, smooth operation process, and low noise. Gloves from the fitting of the hand mold, blowing and flanging, manipulator flaring, manipulator moving outward, hand gloves off, etc., are completed at one time.
Therefore, the features of the glove stripper include:
Fast demoulding speed with fewer operators, low production costs, effective product quality protection, high yield, and low failure rate, can completely replace manual operation.
Glove Stripping Machine Spare Parts
The structure of automatic stripping machine is frame, slide rail, manipulator, drive sprocket, chain, pneumatic components and electrical control and other main components.
Pneumatic part
(1) Pneumatic circuit: air source–a small gas storage tank–a filter–an electronic pulse valve–a blow port
1. Working air pressure is 0.7~0.8MPa.
2. Daily maintenance: Check whether there is gas leakage in the gas pipe joint; Air outlet copper pipe, whether the joint is loose; Drain regularly.
(2) Why does the compressed air in the pneumatic circuit have water? How to deal with it?
1. Air compressor system with water, check the discharge of compressed air storage tank dry drainage system,
2. The small gas storage tank and filter have manual drainage valves, which can be manually drained.
Automatic Glove Stripping Process
When gloves are ripe and beaded — — After the pre-hair removal brush under the glove curl to form a flanging — — Positioning of hand model (seat) before stripping —– Hand model seat falls into the manipulator —- The manipulator holds the hand model — — The air blower nozzle flanges the glove on the mechanical claw — — Mechanical claw holding gloves —— Gloves off the hand model.