How is Ceramic Glove Former Made?

How is ceramic glove former made?

1. The raw material of the ceramic glove former is clay. Different types of clay will affect the molding effect of the glove mold. Generally, clay, a material with better ductility, is selected.

2. To ensure the fineness and flatness of the hand mold, the selected clay needs to be crushed and sieved, which can make the clay finer.

3. When making hand models, attention must be paid to aspects such as the size, thickness and details of the hand models. They should be made according to the design drawings of the hand models to ensure they meet the customer’s requirements.

Note: When making hand models, to make the clay more adhesive, a certain proportion of binder needs to be added to ensure the overall stability and strength of the hand model.

4. After making the hand model, evenly apply the glaze on the surface of the hand model. During this process, special attention should be paid to the uniformity of the glaze and the thickness of the coating to ensure the glazing effect.

5. After the glaze is applied, it needs to be dried. At this point, the drying time and temperature need to be determined based on the type and thickness of the glaze. At the same time, it is necessary to pay attention to observing whether there are any cracks or bubbles on the surface of the glaze.

6. The next step is the baking and drying process. Put the hand model into the oven for baking and drying to ensure that the inside of the hand model is completely dry. This can prevent cracking and deformation during firing.

7. The last process is firing. To ensure the firing effect and quality of hand models, it is necessary to strictly control the furnace temperature and firing time.

How to maintain ceramic hand models?

1. During the glove production process, be careful not to let the hand mold collide with other objects to avoid the formation of cracks. At the same time, it should be used strictly by the prescribed production process parameters to avoid damage to the hand mold structure caused by overheating and overpressure.

2. After use, clean the stains and residual materials from the surface of the hand mold promptly to prevent corrosion. Regularly inspect the hand model. Once any minor damage is found, take timely repair measures to prevent the damage from expanding and affecting its use.

3. The storage conditions for hand models are usually in a dry and well-ventilated environment. Avoid damp conditions that may cause the hand models to get damp and moldy. Soft protective materials can also be used to wrap the hand model to prevent accidental collisions during storage.

The above is the production process and maintenance method of hand models. Producing high-quality gloves requires high-quality hand models. If you have any questions about hand models, please contact us at any time.