Instructions for Glove Stripping Machine

Detailed Breakdown of the Demolding Process

The demolding action for each hand mold passing through the demolding machine is completed as follows:

• The robotic hand aligns with the hand mold.

• Air blowing flips the edge of the glove.

• The robotic hand expands its opening.

• The robotic hand moves outward to remove the glove.

• The robotic hand retracts its opening.

• The glove is partially demolded and proceeds to the next stage.

Features of the Fengwang Automatic Demolding Machine

1. Emergency Stop Button: A one-touch switch is installed beside the machine, utilizing mechanical principles and programmed controls. In case of a malfunction, the operator can quickly press the emergency stop button to minimize losses.

2. Low Failure Rate: The demolding machine has a low failure rate and a glove demolding success rate of 99.9%, effectively improving production efficiency.

3. Wide Applicability: Suitable for gloves of various sizes with strong market adaptability. Operators only need to adjust the robotic hand’s opening size according to different glove sizes.

4. Easy Maintenance: Simple and convenient maintenance—just press the button as per the procedure, and after maintenance, restart the machine for production.

Safety Regulations for the Glove Demolding Machine

1. Shutdown Procedure: When the production line is stopped, ensure the power take-off (PTO) frame pin is pulled out before performing equipment debugging or maintenance.

2. Dedicated Operation: The demolding machine must be operated and maintained by designated personnel. If maintenance requires two or more people, they must coordinate and notify each other before starting the machine.

3. Component Handling During Maintenance: During debugging and repairs, removed parts must be properly stored. Small components, in particular, should be handled carefully, and their installation positions must be verified.

4. Regular Cleaning: Clean the workshop floor and machine surfaces regularly to prevent dust from contaminating the hand molds and gloves.

5. Prohibited Actions: Do not strike the equipment or disassemble circuits and components while the machine is running.

6. Operator Dress Code: During work hours, operators must avoid wearing overly loose clothing or sandals to ensure both machine operation efficiency and personal safety.