Decrypt the Latex Finger Sleeve Production Process

Mar. 08, 2019 | 11:16:41

Latex gloves made by Latex Gloves Making Machine are suitable for car manufacturing, battery manufacturing; FRP occupation, aircraft assembly; aerospace industry; environmental cleaning and finishing. Latex gloves have abrasion resistance, puncture resistance; acid and alkali resistance, grease, fuel oil and various solvents; have a wide range of anti-chemical functions, excellent oil-repellent effect; FDA-approved.

The latex gloves have a common fingertip texture plan, which greatly enhances the grip and effectively avoids slippage; the patent plan without palm prints, uniform penetration and enhanced protection; unique hand planning, cotton fabric, and improved comfort.

Production Process

Latex Gloves Making Machine

The rubber is first sliced by a rubber mixing machine, and then sliced and sent to a sol cylinder and a gasoline mixed sol. The sol is then emulsified and conditioned to pump the latex center can. The rubber solution dissolved in gasoline is fed from the top of the distillation column, heated by steam distillation, and the light component gasoline is heated to a gas phase, and the gasoline gas is mixed and cooled by cold water in the oil and gas cooler. The oil-water mixture is then separated from the oil and water, and the oil moisture layer. The upper layer of gasoline is recovered, and the lower part of the water is pumped to the cooling tower for cooling. After cooling, the gas gasoline of the distillation tower is cooled. The distillation tower is fed to the latex mixing tank according to the pressure of its own, and then prepared to separate the latex raw material latex from the centrifuge. After being toned and filtered, it is ready for use.

The glove model is first cleaned by acid and alkali, and washed with water. The washed model is first immersed in hot water and heated to the immersion coagulant and immersed for dipping. After dipping, send the oven to start drying, add fiber inner sleeve, rinse hot water and then send it to the oven for vulcanization and drying. After the mold is released from the mold, the air is inspected, the low temperature is set, the medium temperature is dry, washed, dehydrated, dried and then packaged and sent to the finished product warehouse.

We are Latex Gloves Production Line Manufacturer. If you have demand, welcome to contact us.